S2 Steel Bits

Extra Length

While standard bits are 25 mm long, every bit in this set is 30 mm long to improve your access to recessed fasteners.

Corrosion Resistant

The bits are made of S2 steel with a zinc-phosphate coating that resists corrosion.

Clear Markings

The size and Tekton “T” is clearly stamped onto every bit.

A standard bit 25 mm in height compared to a Tekton #DZZ93001 bit 30 mm in height A corroded standard bit compared to Tekton bit without corrosion A Tekton bit with clear markings displayed

Rubberized Bit Rails

The flexible rails securely grip the bits so they can’t fall out, while also making it easy to remove any bit one-handed.

Sizes printed in white onto a back rail below red rubber to hold the bits Sizes are printed onto the rails for easy identification
A set of bits in a black rail with white Tekton logo

Full-Sized, Comfortable Driver

Cutaway illustration of the magnet nested within the drive end of the bit driver

Magnetic Bit Receiver

The bits are held onto the end of the driver via a magnet that’s friction-fit within the receiver so that it can’t fall out.

A hand firmly gripping the Tekton Bit Driver. An inset displays the triangular shape of cross-sections taken from the middle of the handle.

Three-Sided Geometry for Torque

The handle’s three-sided geometry provides the leverage you need to generate high turning force by hand.

One hand lightly holding the top end of the Tekton Bit Driver with fingertips and another holding bottom, poised to spin. An inset shows the circular shape of cross-sections taken from the top and bottom of the handle.

Rounded Areas for Quick Spinning

Round sections at the front and back ends of the handle create an ideal shape for quickly spinning long fasteners.

Durable handle shown with Tekton logo imprinted

Durable, Nonslip Handle

The overmolded grip is permanently bonded to the handle and won't degrade or become sticky over time.

RESISTANT TO:
  • EXTREME TEMPS
  • GAS & FUELS
  • OILS & GREASE
  • CLEANERS & SOLVENTS

Compact Carrying Case

The black Tekton bit set case laid flat with a zipper closure, durable 3-layered material, and molded foam for driver.
The black Tekton bit set case laid flat with a zipper closure.
Zipper closure Durable 3-layered material Contoured EVA Foam